Foma SA702i, Руководство пользователя

Страница: 60 / 451

5 8
P
au
s
e
M
a
ki
ng
/r
ec
ei
vi
n
g
a
c
a
ll
Information
● Caller ID notification can also be set with the following procedure.
- Setting Caller ID notification for each call by menu of Function
J
P55
- Setting Caller ID notification collectively from NW service menu
J
P51
- Registering the phone number in Phonebook
J
P95
● Caller ID is notified when the terminal of the other party is compatible with Caller ID notification.
● When making international phone calls, Caller ID may not be able to be displayed even with the code "186"
added, depending on the telecommunication career.
● If the guidance message requires Caller ID notification, try to call again after setting Caller ID notification.
● When a call is dialed with "186" or "184" added, "186" or "184" is recorded in Redial.
Pause
Pause
Sending push tone quickly
By sending push tone, you can send messages to pagers
＊
, operate the answering
system of your house, reserve tickets, etc.
・
Push tone (DTMF) signal can be sent by separating a phone number at the point to enter a
pause (P).
1
Enter a phone number on Stand-by display, and hold down
#
for over a second at the point of entering a pause (P).
2
Enter the rest of the number and press
n
.
・ Up to 80 digits can be entered including "P".
3
Press
C
when the call is connected.
Numbers after "P" are sent as push tone.
Information
● The push tone may not be received depending on the terminal of the other party.
"P" is entered.
・ A pause cannot be entered at the beginning or entered
continuously.
ＸＸＸＸＸＸＸＸ