Foma F905I, Руководство пользователя, Страница: 92 / 532

90
Sound/Screen/Light Settings
GPS alert
Setting sound for GPS positioning
･
This setting is also reflected to Position settings, Loc.
notify setting and Positioning alert for Request setting.
1
m
e
[Settings & NW
services]
e
113
e
1
-
4
e
Select the Ring alert field
e
1
or
2
･
When "Melody" is selected, select ring alert.
2
p
Operation sound
Setting operation sound
You can change the sound to be emitted when a key is
pressed (except side keys [ ▲▼ ],
M
or
P
) or FOMA
terminal is opened or folded. Emission of the sound can
also be inhibited.
･
Keypad sound and terminal open/close sounds are
different from each other depending on the type of set
sound.
･
A change in Operation sound is reflected to the
confirmation sound heard when displaying the battery
level (same as keypad sound).
･
If the emission of the sound is inhibited, the sounds
below are also inhibited.
- Confirmation sound when displaying the battery level
- End alert of infrared communication, iC transmission or data
exchange
1
m
e
[Settings & NW
services]
e
1151
e
1
-
4
✔
INFORMATION
･
Even with Operation sound activated, keypad sound is not
emitted when i-
α
ppli is active (except
s
).
Display turn sound
Setting sound to be emitted when
turning display
1
m
e
[Settings & NW
services]
e
1152
e
Select the
Turn sound field
e
1
or
2
･
When "Melody" is selected, select turn sound.
2
p
Shutter sound/Movie camera sound
Setting shutter sound
You can set a shutter sound to be emitted when shooting
an image with Still camera or recording a movie with
Movie camera (including recording sound with Sound
recorder).
･
This setting is also reflected to Shutter sound of Image
settings and Recording settings.
1
m
e
[Settings & NW
services]
e
115
e
3
or
4
e
1
-
5
Charge alert
Setting alert sound for charging
You can set if you activate the battery charged sound at
the start and end of charging.
1
m
e
[Settings & NW
services]
e
116
e
1
or
2
✔
INFORMATION
･
The alert sound for charging is not emitted in the situations
below even when this function is set to "ON" :
- In Silent mode, Public mode (Drive mode), during a voice/
videophone call, PushTalk session, 64K data communication, i-
mode communication, packet communication
On-hold tone
Setting on-hold tone
1
m
e
[Settings & NW
services]
e
1172
e
1
-
3
Quality alarm
Alarm announcing that call is
about to be interrupted
You can set if you sound an alarm before the voice call is
disconnected when signal quality deteriorates.
･
If the signal quality deteriorates rapidly, the call may be
disconnected without sounding the alarm.
1
m
e
[Settings & NW
services]
e
1173
e
1 - 3
✔
INFORMATION
･
To make settings during a voice call, press
m
and select
"Quality alarm".