Foma F905I, Руководство пользователя, Страница: 312 / 532

310
Data Display/Edit/Management
◆ Receiving all data items
You can receive data collectively by data type.
･
The data saved at the receiving side is deleted, and only
the received data is saved.
･
Enter the same authentication password on the
sending and receiving sides. Decide a 4-digit
authentication password in advance.
･
Still image, movie/i-motion, melody, PDF data or user
information is not applicable to receiving all.
❖
Receiving all data via infrared
communication
1
m
e
[LifeKit]
e
212
e
Authenticate
e
Enter 4-digit authentication
password
e
"Yes"
e
Send all data from
sender
e
"Yes"
❖
Receiving all data via iC transmission
1
Send all data from sender
e
Place FeliCa
marks close to each other with the stand-by
display on the
receiver
e
Authenticate
e
Enter a 4-digit
authentication password
e
Place FeliCa
marks again
e
"Yes"
✔
INFORMATION
･
FOMA terminal cannot save data of ToDo (List function for
managing entries). When all items of ToDo and schedule
data are received, only the schedule data is saved.
･
Receiving time differs depending on the type or number of
received data items. If you receive large size data or a lot of
data items, receiving may take a long time.
･
Depending on the size of data saved, the maximum number
of items that can be received and registered may be fewer
than the limit in the FOMA terminal.
･
Message data received from equipment that is able to save
messages by folder may be saved in the folder for Message
i-
α
ppli. Place the cursor on the folder for Message i-
α
ppli
and press
m1
to check saved message data.
Using infrared remote control
function
FOMA terminal can be used as an infrared remote
controller by downloading i-
α
ppli for infrared remote
control.
･
Download i-
α
ppli suited for the individual model.
Operations differ depending on i-
α
ppli.
･
If i-
α
ppli G
ガイド番組表リモコン
(G-GUIDE TV Remote
Controller) is activated, the FOMA terminal can be used
as infrared remote control for TV.
･
Communication may be influenced depending on the
model of the supported device used and ambient
luminance.
･
Even devices compatible with infrared remote control
may not be operated.
❖
Remote control
Perform remote control operation with the infrared data
port of FOMA terminal pointed at the infrared receiver of
the supported device. Angle for remote control is 15
degrees from the center and distance is up to
approximately 4 m. However, the allowable angle and
distance depend on the operated device or ambient
luminance.
Data exchange settings
Setting operations for data
exchange
Operations for data exchange via infrared
communication, iC transmission or packet
communication or 64K data communication or data
transfer by connecting with PC can be set.
1
m
e
[LifeKit]
e
25
e
Set the required
items
e
p
End alert : Set if you emit the end tone at the end of
communications.
Auto authentication : Specify if you automatically
exchange authentication codes with the other
party for packet communication or 64K data
communication or data transfer by connecting
with PC.
･
To set "ON", perform authentication and enter
4-8 digit Auth code: terminal (FOMA terminal)
and Auth code: PC (the other party) and press
p
.
Ph.book image sending : Specify if you send image
saved in the phonebook along with all items of the
phonebook entries.
Infrared data port
15° 15°
15°
Approx. 4 m
or less
Infrared receiving port