Foma F905I, Руководство пользователя, Страница: 224 / 532

222
i-
α
ppli
･
Press
m
[i-
α
ppli]
26
on the stand-by display to
display the Shortcut list. Detail information can be
displayed and perform Cancel two-key s.cut from the
submenu of the list screen.
◆ Starting i-
α
ppli using one-key/two-key
shortcut
<Example> Starting i-
α
ppli using two-key shortcut
1
0
-
9
e
d
(1 sec. or more)
Starting i-
α
ppli using one-key shortcut :
g
(1 sec.
or more)
Automatically starting i-
α
ppli
◆
Specifying whether to start
automatically <Auto start>
Set all i-
α
ppli, which are set to "ON" for User in Set auto
start info., at once to start automatically.
1
m
e
[i-
α
ppli]
e
22
e
1
or
2
◆
Setting date and time of Auto start
<Set auto start info.>
Set the conditions such as ON/OFF of auto start or start
time for each i-
α
ppli and display the preset details.
･
The conditions that can be set depend on the i-
α
ppli.
･
Some i-
α
ppli may not be able to start automatically.
･
When Auto start is "OFF", Auto start info cannot be
saved.
1
d
(1 sec. or more)
e
Select a folder
e
Place
the cursor on the i-
α
ppli to set and
m
e
5
e
Set the required items
e
p
User : Select if you perform Auto start with the
conditions below.
Time : Enter the time to automatically start the i-
α
ppli.
Repeat : Set the condition for repetitive Auto start of
the i-
α
ppli.
Weekly : Set the day of the week for Auto start when
"Weekly" is set for Repeat.
Date : Set the date for Auto start when "Onetime" is
set for Repeat.
Software : Specify if you automatically start at the
intervals preset for the i-
α
ppli.
i-
α
ppli 1-4 : Depending on i-
α
ppliDX, up to 4
conditions of Auto start can be set while it is
running. Specify if you enable those settings.
✔
INFORMATION
･
Even with Auto start set, automatic activation does not
occur in the cases below, causing to appear on the
stand-by display and to be recorded in Start failure hist.
- When the screen except the stand-by display appears
- UIM operation restriction is set (except for preinstalled i-
α
ppli)
- When UIM cannot be detected
- When the interval of Auto start is too short
- When All lock, Omakase Lock, Personal data lock or Privacy mode
is ON (when i-
α
ppli is "Authorized access")
- When 2in1 is ON in B mode (only for i-
α
ppli to use mail function)
- When the i-
α
ppli usage is stopped by IP (Information Provider)
･
Even if you change "Repeat" of multiple i-
α
ppli to set them
start automatically at the same time, only one of them can
be activated at one time. The information of the i-
α
ppli that
failed to be activated is recorded in Auto start failure log,
however, does not appear on the stand-by display.
◆ Displaying history when Auto start of
i-
α
ppli fails <Start failure hist.>
When Auto start of the i-
α
ppli fails, appears on the
stand-by display and the name of the i-
α
ppli, date and
time, and causes are recorded.
･
Up to 20 items can be recorded. When exceeding the
limit, record is overwritten chronologically.
･
When displaying Start failure hist. or when the next
Auto start is successful, on the stand-by display
disappears.
1
m
e
[i-
α
ppli]
e
31
･
To delete histories, press
p
and select "Yes".
i-
α
ppli To
Starting i-
α
ppli from site, mail or
ToruCa
1
Select a link item enabling to start i-
α
ppli of
the site, i-mode mail or ToruCa
e
"Yes"
✔
INFORMATION
･
i-
α
ppli not saved in FOMA terminal cannot be started with
i-
α
ppli To. Some i-
α
ppli can be started immediately after
being downloaded from a site, without saving.
･
Partially saved i-
α
ppli cannot be started from mail with i-
α
ppli To.
･
For i-
α
ppli starting just after downloading from sites,
communication confirmation screen while they are
activated may appear.
･
Some i-
α
ppli program may not be saved in the FOMA
terminal.
･
If the i-
α
ppli is set not to start with i-
α
ppli To, the i-
α
ppli
cannot be started. → P215