Foma F905I, Руководство пользователя, Страница: 255 / 532

253
1Seg
Before using 1Seg
■ 1Seg watching procedure
<Example> When watching 1Seg for the first time
Channel setting
→
P254
Save the channel list corresponding to the area where you
watch 1Seg.
Activating 1Seg
→
P255
Stretch out the 1Seg antenna and activate 1Seg.
■ 1Seg antenna
When watching 1Seg, the 1Seg antenna is used to receive
1Seg wave.
･
When changing the direction of the 1Seg antenna, do
not give excessive force to it.
･
When pulling out the 1Seg antenna, put your finger on
the gut of the upper part of 1Seg antenna, and pull it
quietly with care.
･
When changing the direction of the 1Seg antenna,
move it holding a part close to the root of the 1Seg
antenna.
･
When retracting 1Seg antenna, hold the root of the
1Seg antenna and retract until it stops. Do not retract
the 1Seg antenna with holding the head of it.
■ When there is an incoming call or alarm is activated
while watching 1Seg
･
1Seg sound is interrupted in the cases below :
- i-mode mail with Display priority set to "Show message", SMS,
MessageR&F reception (if an image of movie/i-motion is
played while receiving, 1Seg watching is interrupted)
- ToruCa downloaded from IC card reader
- Alarm (Alarm clock, schedule, Countdown timer) activated
･
If voice call, videophone call or PushTalk call is
received, 1Seg watching is interrupted.
･
With vertical display, a screen of the activated function
appears emitting a sound. You can restart watching TV
by terminating the function or pressing
o
. With
horizontal display, 1Seg and activated function are
displayed on two screens. ( → P264). When the function
ends, the horizontal standard screen or horizontal full-
screen for 1Seg watching reappears.
✔
INFORMATION
･
If UIM is not inserted, you unsubscribed to DoCoMo or
made FOMA service inactive, you cannot watch or record
1Seg.
･
If you repeat 1Seg watching and recording in
communication disabled state, 1Seg activation may be
disabled even with UIM inserted. In such a case, enable
communication e.g., by moving to FOMA service area, and
retry 1Seg activation.
･
1Seg watching is interrupted when i-
α
ppli is activated.
Every time you press
o
, you can switch 1Seg watching
and i-
α
ppli.
･
Note that DoCoMo assumes no responsibility whatsoever
for any loss or modification of saved contents resulting
from malfunction, repair or other handling of the FOMA
terminal.
When changing the model of or repairing the FOMA
terminal, information (TVlink, information saved in the
storage area, etc.) saved in the terminal cannot be
transferred; you are recommended to maintain a separate
record of such information.
･
Watching 1Seg long time while charging may reduce the
battery pack lifetime.
Step 1
Step 2