Foma F905I, Руководство пользователя, Страница: 41 / 532

39
Before Using the Handset
Remaining battery level
Checking remaining battery level
A battery icon appearing on the top of the display shows
an approximate remaining battery level.
(Battery level 3) : Ample charge
(Battery level 2) : Low charge.
(Battery level 1) : Battery level very low. Charging
required
･
The battery icon set by default varies by the color of the
FOMA terminal.
･
When FOMA terminal is folded, the remaining battery
level can be checked on the sub-display.
❖
When battery is almost exhausted
A message indicating low battery appears on the display.
Pressing any one of
g
,
c
,
f
keys deletes the
message temporarily. After a period of time, a battery
alarm sounds from the speaker and all icons on the top of
the display start blinking. The power is turned off after
approximately 1 minute. These operations stop when
charging starts; press
f
to immediately stop the
battery alarm.
･
During a call, the message remains displayed and the
battery alarm keeps sounding from the earpiece. After
approximately 20 seconds, the call is terminated, the
battery alarm sounds from the speaker and all icons on
the top of the display blink.
･
With the FOMA terminal folded, the sub-display shows
"Low battery".
◆
Checking remaining battery level by
sound and display <Battery level>
1
m
e
[Settings & NW
services]
e
775
The battery level appears and the keypad sound (
→
P90) is emitted depending on the battery level. After
a while, the screen returns to the menu list.
Power ON/OFF
Turning power ON/OFF
❖
Turning power ON
1
f
(2 sec. or more)
The wake-up screen appears and the stand-by
display appears. appears at the bottom of the
display while reading UIM.
･
A signal level icon appearing in the top of the
display shows the approximate received signal
level.
･
The battery icon set by default varies by the color
of the FOMA terminal.
･
With the FOMA terminal folded, the reception
level can be confirmed on the sub-display.
❖
Turning power OFF
1
f
(2 sec. or more)
◆ Operations to perform after turning
the power ON for the first time
When turning the power ON for the first time, operate in
the order of "AdvancedMode setting" → "Initial setting".
The settings made can be changed later.
･
When initialization is finished, a confirmation screen of
software update function appears. Press
g
to display
the stand-by screen.
Battery icon
"Three pips" "Two pips" "One pip"
(Battery level 3) (Battery level 2) (Battery level 1)
Stand-by display
Signal level icon
Icon
Received
signal
level Outside the service
area and where
radio waves are
hard to reach
Strong Weak