Foma D702i, Руководство пользователя

Страница: 75 / 405

73
Making/
Rec
e
iv
ing Vid
e
o
phone Cal
ls
2
t
3
Talk with the other party
4
f
when you finish the call
Operations during videophone calls
The following operations can be performed from the submenu. Hold down
C
for over a second during
a videophone call to record the other party’s voice and image (Movie Memo).
INFORMATION
● You can also make a videophone call by performing in order of Steps 2, Step 1. When
t
is pressed and the
phone number is entered, a videophone call is made automatically after about 5 seconds.
● You can make videophone calls by setting conditions.
☛
P53
● When
Speakerphone
is set to
ON
in Videophone Settings and Silent Mode is active, if you make a videophone
call, a confirmation screen appears asking whether to switch to the speakerphone call. Select
YES
or
NO
.
● When you talk on a videophone call while a flat type earphone/microphone set with switch (optional) is
connected, the voice sounds from the connected earphone/microphone regardless of the setting of
Speakerphone
in Videophone Settings.
● Please note that digital communication charges apply for videophone calls instead of voice call charges even if
the substitute image or Chara-den is used.
Submenu item Description Page
a
Change to voice Switches from a videophone call to a voice call. P74
b
Camera settings
Applies effects to the image to be sent and adjusts its brightness and color
density.
P79
c
Frame/
Subst. image
Adds a frame on the image to be sent or sends Chara-den or a still image. P78
P77
P79
d
Switch camera view
Switches between the in-camera and out-camera. P80
e
Image quality Sets the quality of sent and received images. P78
f
V. phone settings
Changes the settings for the screen displayed during videophone calls. P81
g
Send DTMF Transmits tone signals (DTMF) during videophone calls. P75
h
Volume
Adjusts the earpiece volume. P61
Your image is displayed while being connected.
･
If the phone of the other party is busy, you will hear a busy signal. The
message, Busy. or Connection failed. is displayed on the screen. Press
f
to end the call and call again later. You can call back quickly by
using Redial.
･
When the substitute image is Chara-den, Chara-den may not be
displayed. If this happens, the default image for the substitute image
setting is sent to the other party.
☛
P82
･
Charging begins when Connected to videophone . is displayed.
The other party’s voice comes out of the speaker (Speakerphone function).
･
To put the call on hold:
o
･
To turn on/off the speakerphone function:
a
or
n
･
Depending on the other party’s settings, the substitute image may be
displayed.
･
To disable turning on the speakerphone function automatically, change
the setting in Videophone Settings or activate Silent Mode.
Making v
ideophon
e
c
a
lls
Next