Foma D702i, Руководство пользователя

Страница: 39 / 405

37
Before Us
ing D7
02i
INFORMATION
● Insert or remove the UIM carefully as forcing it may damage the card.
●
Carefully handle the removed UIM so that it does not become lost.
UIM security codes
The PIN1 and PIN2 codes are used for the UIM.
Both codes are set to “0000” at the time of subscription to the FOMA service. You can change this to any
code (4 to 8 digits).
☛
P128
UIM operation restriction function
FOMA terminal is provided with the UIM operation restriction function for protecting your data and files.
･
When the data or files downloaded from sites or the data attached to mail are saved in FOMA
terminal with the UIM inserted, the UIM operation restriction function is automatically set to these
data or files.
･
If the UIM is replaced by another UIM or is removed from FOMA terminal, the data or files with the
UIM operation restriction function set cannot be displayed or played.
･
The data or files with the UIM operation restriction function set cannot be sent by infrared
communication.
Inserting the UIM
Removing the UIM
a
Slide the lid of the UIM case in the direction of the
arrow.
This will unlock the lid.
b
Open the lid.
c
Insert the UIM fully in the slot inside the lid in the
direction of the arrow shown in the figure.
d
Close the lid of the UIM case and slide the lid in
the direction opposite to that shown in Step
a
until it clicks and is locked in place.
Note: If you cannot close the lid of the UIM case
successfully, slide the UIM a little in the
direction opposite to the insert position.
a
Open the lid of the UIM case.
･
Follow Step
a
to
b
in “Inserting the UIM”.
b
Pull out the UIM.
Us
ing the
UI
M (FOMA
c
a
rd
)
Next