Foma D702i, Руководство пользователя

Страница: 134 / 405

132
Safe
ty Sett
ings
Setting Remote Lock
Remote Lock is activated by making a voice call to FOMA terminal under the preset conditions.
･
Send your caller ID and make a call to FOMA terminal.
･
In the following cases, the counting of incoming calls is not started and Remote Lock is not set.
・ When the other party receives a call (including the case that the call is handled by Response and
Hold or Answer Machine, or received by Auto Answer)
・
When FOMA terminal is busy
・
When the call cannot be received because FOMA terminal is outside the service area, the power is
turned off or Self Mode is on, etc.
･
If the following states occur before making the specified number of calls, the time counting is reset.
・
When the other party receives a call (including the case that the call is handled by Response and
Hold or Answer Machine, or received by Auto Answer)
・ When the power of FOMA terminal is turned off
・ When the set monitoring period has passed
1
Make a voice call to FOMA terminal under the set conditions
The guidance notifying that FOMA terminal is locked is played and Remote Lock is set for the terminal.
■ Canceling: Enter the terminal security code in FOMA terminal with Remote Lock set.
INFORMATION
● The count of incoming calls is only effective for the first call made from the specified sender. After the counting
has been initiated, additional received calls from other senders are not counted.
● Even if a call is rejected, or transferred by Voice Mail Service or Call Forwarding Service (excluding when the
ringing time is 0 sec ), that call is counted as an incoming call.
● When Answer Machine or Auto Answer is set, end the call before Answer Machine or Auto Answer starts.
● Even if a call arrives while Remote Lock is on, the call is disconnected. If a call arrives from phone numbers
that are set as sender, the guidance informing that Remote Lock is on is played and then the call is
disconnected.
Menu 884
Preventing making/receiving calls
Self Mode
Disable all functions that require communications such as making/receiving calls or sending/
receiving mails. Infrared communication and infrared remote control are also disabled.
1
c
(for over a second)
z
Select
Yes
Self Mode is set and is indicated on the standby display.
･
When you use shortcut operations:
1 z
Select Yes
■
Canceling:
c
(for over a second)
･
When you use shortcut operations:
2
INFORMATION
● Note that if an emergency calls (110, 119 or 118) is made in Self Mode, Self Mode is canceled.
● If you receive a call when Self Mode is on, a guidance is played for the caller that radio waves are hard to reach
or the power of your terminal is turned off. You can use Voice Mail Service and Call Forwarding Service.
● i-mode Mail or Message R/F sent when Self Mode is set is stored at the i-mode Center and SMS is stored at
the SMS Center. When you receive messages, cancel Self Mode and perform Check i-mode Message or
Check SMS.
Default OFF
S
e
lf
M
o
d
e