Foma D702i, Руководство пользователя

Страница: 160 / 405

158
Cam
e
ra
Keep the out-camera about 7 to 10 cm away from the code to scan.
1
m61 z
Slide the macro mode switch to (Macro)
2
Scan the code
3
m4
When the data is divided into multiple parts (up to 16), scan them one by one according to messages
displayed on the screen.
Scanning the code
Scanning divided QR codes
7 to 10 cm
Approx.
Macro mode switch
･
When Bar Code Reader ends, return the macro mode switch to the
position (normal mode). If you forget to return the switch, you are likely
to shoot a distant object with (Macro) and not to get a clean shot.
･
To scan large size codes, switch to the normal mode.
When you point the out-camera toward the code, the code is scanned
automatically. If scanned correctly, a confirmation sound is played and the
scanned data is displayed.
･
When it is hard to scan the code, if you adjust the distance, angle or
direction of the code and the out-camera, the code may be able to be
scanned.
･
If the data exceeds 11,000 one-byte or 5,500 two-byte characters, the
exceeded characters are not displayed, but can be saved.
･
When scanning is paused such as while a submenu is displayed, the
icon indicated at the upper right of the screen changes to .
■
Re-scanning the code:
p
The scanned data is saved to FOMA terminal.
･
When five data has already saved or the memory is not enough, a
confirmation screen is displayed asking whether to delete the saved
data. Select
Yes
to delete the saved data.
■
Copying the text data in the scanned data:
a
m1 z
Select the start position to copy
･
To copy the entire text data:
mo
b
Select the end position to copy
･
Press
c
to cancel scanning on the way. Select Yes when a confirmation
screen is displayed asking whether to discard the scanned QR code data.
Remaining number of QR codes/total number of QR codes
This grid indicates the total number of QR codes.
Green: last scanned Blue: scan completed Gray: yet unscanned
Bar
C
ode Reader