Foma D702i, Руководство пользователя

Страница: 52 / 405

50
Maki
ng
/R
ece
ivi
ng Cal
ls
･
The following key operations are available during a call:
・
%
: Adjust the volume ・
l
: Display received calls ・
r
: Display redials
・
t
: Activate Camera
・
p
: Start the phonebook
・
C
(for over a second): Record the other party’s voice (Talking Voice Memo)
Entering pauses or timed pauses
Pauses and timed pauses are available only for voice calls.
Calling to “03XXXXXXXXP12345” (P=Entered pause)
When you press
o
after the call is connected, the numbers after the pause are dialed.
A pause (P) is used for sending messages to beepers*, operating the answering system at home,
reserving tickets, etc. At the point the pause (P) is entered, the dial digits are separated and tone signals
(DTMF) are sent.
1
(
(for over a second)
･
You cannot make a call if a pause is entered at the beginning of the phone number.
A timed pause (T) is used to dial outside line numbers with extensions. Enter “T” between the outside
line and extension numbers to dial the extension number after a set number of seconds following the
outside line number.
1
#
(for over a second)
･
Timed pauses can be entered in succession.
･
Each timed pause is followed by a second interval.
･
You cannot make a call if a timed pause is entered at the beginning of the phone number.
INFORMATION
● Tone signals (DTMF) may not be received depending on the receiver’s device.
● You cannot make a call to another party by putting the current call on hold and entering a pause (P) or timed
pause (T).
● When it is necessary to send tone signals (DTMF) following voice prompts as in making ticket reservations, the
speakerphone function is useful. In this case, input tone signals (DTMF) after turning on the speakerphone
function.
Entering a pause “P”
Entering a timed pause “T”
Example
Maki
ng
ca
ll
s
* From January 2001, the DoCoMo display beeper name has changed to “QUICKCAST”.