Foma D702i, Руководство пользователя

Страница: 239 / 405

237
i-
α
ppli
･
When UIM cannot be detected
･
When Auto Start is set to OFF
*1
･
The interval of auto start is too short
･
During a call or communication
･
When a screen other than the standby display is
displayed or i-
α
ppli standby display operation is in
progress
･
When any other function is running (excluding the
function during the list display and the frame
composition of My Picture, the list display, replay,
and edition of i-motion, the list display and replay
of melody)
･
In All Lock or PIM Lock
･
When Privacy Mode is on (while i- α ppli is set to
Authorized access )
･
While an alarm or schedule alarm is sounding
(including when the set time is the same as the
time for Auto Start)
･
When i-
α
ppli usage is stopped by the IP
(Information service provider)
● When two or more i-
α
ppli applications are specified
to start automatically at the same time, only one
i-
α
ppli is activated. The failed i-
α
ppli information is
recorded in Start Failure History, but is not
displayed on the standby display.
● In the
User
settings, the same setting set for other
i-
α
ppli cannot be set.
● If all of the start time are set before the time set in
Date and Time Setting, auto starting will be disabled.
Displaying history when Auto Start of i-
α
ppli
fails
Start Failure History
If automatic start of i-
α
ppli fails, appears on the
standby display and the i-
α
ppli name, the date and
time and the failure reason are registered.
･
Up to 20 start failures are recorded. When there
are more than 20 abnormal exits, the 21st exit is
written over the oldest one.
･
When you display the start failure history or when
the next automatic start is successful, on the
standby display disappears.
1
m331
■
Deleting the history:
p z
Select Yes
Starting i-
α
ppli from a site or mail
i-
α
ppli To
Select a link item that can start the site or i- α ppli
of the site or i-mode Mail and then start the i-
α
ppli
(i- α ppli To).
1 Select a link item enabled to start i-
α
ppli
from the site or i-mode Mail
2
Select
Yes
The connection to the site is terminated and
i-
α
ppli is started.
INFORMATION
● If the i-
α
ppli you attempt to start with i-
α
ppli To is
not saved in FOMA terminal, the message that there
is no specified i-
α
ppli is displayed and i-
α
ppli
cannot be started. Note that some i-
α
ppli may start
just after downloaded from sites even if it is not
saved.
･
For i-
α
ppli that starts just after downloaded from a
site, a confirmation screen may be displayed asking
whether to make communication while it is activated.
･
When you quit i-
α
ppli started just after
downloaded from sites, a confirmation screen is
displayed asking whether to save i-
α
ppli. Note
that some i-
α
ppli may not be able to be saved in
FOMA terminal.
● If the specified i-
α
ppli is set not to start with i-
α
ppli
To, a message is displayed and i-
α
ppli is not
started.
☛
P234
Operating i-
α
ppli Standby Display
i-
α
ppli Standby Display
When i- α ppli is set for the standby display, you
can start i-
α
ppli from the standby display to
operate. or is indicated at the top of the
display when the i-
α
ppli standby display is set.
･
It is necessary to set i- α ppli for the standby
display beforehand.
☛
P112
INFORMATION
●
When you set i- α ppli that performs communication,
it may not operate correctly depending on radio
wave conditions, etc.
●
If All Lock, PIM Lock or Privacy Mode ( i- α ppli is set to
Authorized access ) is activated while setting the i- α ppli
standby display, the standby display will be canceled
temporarily. If you cancel All Lock, PIM Lock, or
Privacy Mode, the i- α ppli standby display restarts.
●
If the use of i- α ppli set to the i- α ppli standby display
is stopped by IP (Information service provider), the
i- α ppli standby display is canceled.
●
While the i- α ppli standby display is activated, if an
error that makes it difficult to continue the i- α ppli
standby display occurs, a confirmation screen
appears asking whether you will cancel or not. When
you select Yes , the i- α ppli standby display setting is
canceled. At this time, the name of i- α ppli and end
date/time are recorded in Abnormal Exit History.
i-
α
p
p
li To
Next