Foma D702i, Руководство пользователя

Страница: 46 / 405

44
Before Us
ing D7
02i
1
f
(for over 2 seconds)
The wake-up screen appears and then the standby display is displayed. Displaying the wake-up
screen may take some time.
･
If Quick Start-up is set to
ON
, the time until the standby display is displayed becomes short.
1
f
(for over 2 seconds)
INFORMATION
●
Calls may be cut off even when is indicated and you are not moving.
●
When Reset Call Cost is set to ON , entry of the PIN2 code is required.
● In the following cases, if you do not press any keys for about 90 seconds, the display disappears (except while
shooting with the camera, etc.). It is the same also during a voice call. The display appears again if there is any
key operation or incoming call.
･
When
Turn light on
is set to other than
Always
in Display Light Setting
･
During charging (when Turn light on is set to other than Always , and AC adapter connected is set to Terminal
settings in Display Light setting)
Switching to English display
Select Language
1
m8272
2
Press
2
･
To switch to Japanese display:
1
INFORMATION
● The setting is saved in the UIM.
Turning the power on
Turning the power off
Default Japanese
Battery level icon
･
If the date and time have not been set, a message indicating
that is displayed. Press
o
to set the date and time.
･
If no UIM is inserted, a message indicating that insertion
of the UIM is required is displayed. Turn the power off,
insert the UIM and then turn the power back on.
･
When PIN1 Code ON/OFF is set to ON , enter the PIN1 code.
･
The following items can be changed:
･ Standby image
☛
P109 ･ Battery level icon
☛
P120
･
Time display format
☛
P123
Icon
Received
signal level
Strong Medium Weak Outside the service area
and where radio waves are
hard to reach
is indicated while reading the UIM
and disappears when reading is
completed.
Date/day/time
Received
signal level
The standby
image is
displayed.
Select Language