Foma D702i, Руководство пользователя

Страница: 47 / 405

45
Before Us
ing D7
02i
Setting the date and time
Date and Time Setting
The time setting can be performed in 2 ways: obtaining the time information from DoCoMo network to
adjust the time setting of your FOMA terminal, or manually entering the current time to your terminal.
1
m851
2
Select each item to set
3
Press
p
The automatic time correction takes place when the UIM is inserted and you turn the power on in a
location where radio waves reach.
･
The automatic time correction sometimes causes a time error of several seconds. In addition, it may
fail to correct the time depending on the radio wave condition.
･
Even if the time information is received while i- α ppli is running, the time may not be corrected
depending on the i-
α
ppli.
･
When Auto time adjust is set to ON , the time may not be corrected for a while. To enable the
automatic time correction, turn the power off and then on.
･
When no UIM is inserted or FOMA terminal is out of the service area, the automatic time correction is
not performed even if you turn the power off and then on.
INFORMATION
● You cannot use the following functions when the date and time are not set:
･
Random Display Image
･
Auto Power ON/OFF
･
Alarm Clock
･
Scheduler
･
Certificate Download
☛
P181
･
i-
α
ppli auto start
☛
P236
･
i-
α
ppli DX requiring the time setting
☛
P230
･
Downloading i-motion with replay restrictions
☛
P253
･
Data (schedule) transfer
☛
P267, P268
･
Software Update
･
Update Definition
･
SSL communication (authentication)
Default Auto time adjust: ON Offset: +, 00h00m
Auto time adjust
： Set whether to perform the automatic time correction.
･
To enter the date and time manually, set Auto time adjust to OFF.
Offset
： Specify the amount of time advance (+) or delay (-) so that your terminal's clock
advances from/delays to the time obtained for a given length of time.
･
Enter the time between 00h00m and 23h59m.
･
Prefix 0 if the time and/or minute is a single digit (0 to 9).
Date, Time
： Set the date and time.
･ Enter the year by the last 2 digits of the year. From January 1, 2000 to
December 31, 2050 can be set.
･
Enter the time in the 24-hour clock (00h00m to 23h59m).
･
Prefix 0 if the month, date, time and/or minute is a single digit (0 to 9).
･
The entered number can be increased or decreased by
%
. Also, you can reenter the number
after highlighting it with
&
.
When the automatic time correction is set
･ When you set
Auto time adjust
to
ON
,
Offset
can be set.
Date
and
Time
cannot be set.
Next
Da
te and
Tim
e
Set
tin
g