Foma D702i, Руководство пользователя

Страница: 152 / 405

150
Cam
e
ra
■ Setting the video for the standby display:
m21 z
Select
Yes
The recorded video is saved to FOMA terminal and set for the standby display.
･
If zooming is available for the shot video, select Yes (Same size) to maintain the image size or
select
Yes (Large size)
to enlarge it to the screen size.
･
If the i-
α
ppli standby display has been set, a confirmation screen asking whether or not to
cancel it is displayed continuously.
■
Adding the video to phonebook entries:
m2 z 2
or
3 z
Select Yes
The recorded video is saved to FOMA terminal and the phonebook registration screen is displayed.
･
To register updating, select the phonebook data to register.
･
Videos can be added to the phonebook entry only when the image size is set to 128 x 96
(Sub-QCIF) or 176 x 144 (QCIF) and the recording type is set to Video only .
■ Changing the title:
m31 z
Enter the title (up to 31 characters regardless of one-
byte or two-byte)
z p
･ The changed title will be valid after the video is saved.
■ Inserting a ticker:
m32 z
Select Yes
The recorded video is saved to FOMA terminal and the ticker setting screen is displayed. Follow
the procedure from Step 3 in “Inserting tickers”.
☛
P256
･
When the image size is set to 320 x 240 (QVGA), a ticker cannot be inserted.
■
Displaying the list of videos saved in FOMA terminal:
m5
5
Press
o
or
C
The recorded video is saved in
Camera
folder of
i-motion
.
■ Checking the saved video immediately:
p z
Select a video
･
After the confirmation, press
c
twice to return to the video recording screen.
･
The check is not available when Movie Camera is started from the phonebook, mail or i- α ppli
software.
INFORMATION
INFORMATION
● When key operation is made or recharging is started during recording, operation tone may be recorded.
● Recording may be stopped before the file size reaches the limit set for the size restrictions, depending on data
you record.
● When there is not enough memory or the saved data exceeds the maximum number, delete unwanted videos
or sounds or change settings of the size restrictions according to the screen.
● The recording stops if a call arrives, the time set for the alarm or schedule alarm arrives, or
b
is pressed
during recording. The data recorded before the stop is saved automatically when Auto save is set to Yes . When
Auto save is set to No , a confirmation screen is displayed.
● If the battery is almost exhausted during recording, the low battery message appears and the recording process
stops. If Auto save is set to Yes , the data that has been recorded till then is automatically stored; pressing
o
returns
you to the recording screen. If Auto save is set to No , pressing
o
displays a confirmation screen. Even after you
return to the recording screen, you cannot operate it while you see a message indicating that the battery level is too
low for recording.
● If an alarm or battery alarm interrupts recording, you may hear the alarm or battery alarm recorded at the end
of the saved video/sound.
● You cannot use the following functions on the confirmation screen when Movie Camera is started from the
phonebook or mail.
● The following should be set for the out-camera and the in-camera separately. When you switch between the
cameras, the settings are also switched accordingly.
･
Composing mail
･
Standby display settings
･
Saving videos in the phonebook
･
Inserting a ticker
･
Displaying the video list
･
Scene mode/effect
･
Frame
･
Image quality
･
Size restrictions
･
Image size
･
Recording type
Movi
e Camer
a