FT-112(D) Panel Weighing Indicator, Technical Manual, Rev.1.0.0, May 2019
Page
95
of
170
Digital inputs
Digital inputs can be used instead of pressing keys for taring, zeroing, clear tare, transfer data etc. as shown
below. Basic peak on the display and hold display are the additional input functions at basic weighing. Refer to
SmartAPP applications in this manual for digital input functions of selected application.
Key functions via inputs
Zeroing, Taring, Clear, Print
The key functions are executed via digital
inputs. Taring via digital input is shown in
the drawing as an example.
Basic Peak
The instrument follows the peak of the
loading during the input signal
This basic weighing feature is not related
with the peak hold application
In SmartAPP
Not for legal usage.
Important Note:This feature is not related
with Peak Hold application of SmartAPP.
But only for basic peak hold usage at
basic weighing mode.
Hold
The instrument holds the weight
indication during input signal which help
the measured value to the operator for a
while.
Not for legal usage.
Remote Input over Fieldbus or BSI
The digital input(s) can follow PLC as a
Remote input, if the instrument is
equipped with any fieldbus option. Refer
to related fieldbus command table to
receive the status of inputs. This usage is
independent from the weighing process
of the instrument.
