FT-112(D) Panel Weighing Indicator, Technical Manual, Rev.1.0.0, May 2019
Page
68
of
170
[ 9-- DIAGNOSTIC ] Diagnostic Block
[ 9--
DIAGNOSTIC
]
DIAGNOSTIC MAIN BLOCK
Press
key sequentially to access this main block,
or press key or
key to enter configuration parameters,
or press
key to go to the next block,
or press
key to exit from programming.
[ 91-
HARDWARETEST
]
HARDWARE TESTING
Press key or
key again to enter this menu.
Or press
key to enter the next sub-block.
[ 911
KEY
]
Key testing
[ 912
RS232
]
RS232C serial port testing
[ 913
RS485
]
RS485 serial port testing
[ 914
RS422
]
RS422 serial port testing
[ 915
USB
]
USB port testing
[ 916
IN / OUT
]
Digital Input / Output testing
[ 917
DISPLAY
]
Display testing
[ 918
LC SIGNAL mV
]
Load cell signal measuring in millivolt (FT-112)
[ 918
DLC COUNTS
]
Internal count values of the digital Load cell(s) (only FT-112D)
[ 919
PRINTER
]
Printer testing
[ 92-
HISTORY
]
HISTORY
Press key or
key again to enter this menu.
Or press
key to go to the next sub-block.
[ 921
PEAK LOAD
]
The last 20 peak loads listed in this parameter.
[ 922
UNDER LOGS
]
The last 20 under errors listed in this parameter.
[ 923
ERROR LOGS
]
The last 20 errors listed in this parameter.
[ 924
ENTRY LOGS
]
The last 20 Service/User entry listed in this parameter.
