Festo Soft Stop SPC11 Series, Системное руководство

Страница: 120 / 134

A. Operating the SPC11 in accordance with slave profile 7.4
A-6
Festo P.BE-SPC11-SYS-ASI-EN en 0203NH
Write position values
Positions are specified as the number of increments (incr.)
and refer to the measuring system length used (total length =
2
16
incr. = 65536 incr.). 2 bytes are used for transmission.
The high byte is the higher-value byte, the low byte is the
lower-value byte.
Example 1
Measuring system length: 2 m
2 m
Z
65536 incr.
1 mm
Z
65536 incr./2000
1 mm
Z
approx. 32768 incr.
Target position (example): 1.5 m
1.5 m
Z
49152 incr.
Z
C000 (hex)
High byte: C0
Low byte: 00
Example 2
Measuring system length: 1 m
1 m
Z
65536 incr.
1 mm
Z
65536 incr./1000
1 mm
Z
approx. 65536 incr.
Target position (example): 0.85 m
0.85 m
Z
55705.6 incr.
Z
D999 (hex)
High byte: D9
Low byte: 99
Note when loading position values:
When a position is reached, a flag is set internally in the
SPC11, thereby registering that the position has been
reached. If, when an intermediate position has been reached,
a new position value for the same intermediate position is
loaded and a positioning order to move to this position is
issued, the drive will remain in the current position.