OBID
i-scan
®
UHF
Manual
ID ISC.LRU3000/3500
FEIG ELECTRONIC GmbH
Page 158 of 193
H90202-7e-ID-B.docx
DB-N:
Number of data blocks to be read from the Transponder, starting at DB-ADR.
The maximum number of DB-N, depends on DB-Size and the interface transmit buffer
size TX-BUF. The maximum number of DB-N is:
(TX-BUF - 10 )/(DB-Size+1) e.g. Block size 2 (DB-N = (512 – 10) / (2+1) = 167).
NOTE:
Without using the read complete bank functionality, maximum 167 datablocks can be read
with a single read multiple blocks command!
DB-SIZE:
Number of bytes of one data block. This value depends on the specification of the Trans-
ponder
SEC-STATUS:
Block security status of following data block.
DB:
Requested data block. The block size is defined by DB-SIZE.