![background image](http://html1.mh-extra.com/html/feig-electronic/id-isc-lru3000/id-isc-lru3000_manual_3881201059.webp)
OBID
i-scan
®
UHF
Manual
ID ISC.LRU3000/3500
FEIG ELECTRONIC GmbH
Page 59 of 193
H90202-7e-ID-B.docx
READ_COMPLETE_BANK:
(OperatingMode.BufferedReadMode.DataSelector.Mode.Read_Complete_Bank)
(OperatingMode.NotificationMode.DataSelector.Mode.Read_Complete_Bank)
(OperatingMode.ScanMode.DataSelector.Mode.Read_Complete_Bank)
If this bit is set the reader will read out all memory blocks from the selected Memory BANK
starting from DB-ADR. If DB-ADR is “0” the complete memory bank is read.
b00
Reader reads out the memory blocks according to the settings in DB-
ADR, DB-N, D-Start and D-LGT.
b01
Reader reads out all blocks of the selected memory bank starting at DB-
ADR
NOTE:
This functionality is has following limitations with respect to the individual memory banks:
EPC Memory:
max. 512 Bit
User Memory:
max. 16 kBit
TID Memory:
max. 512 Bit
Reserved Memory:
max. 64 Bit
BANK:
Memory bank of the Transponder which will be accessed by the Reader
Bit
7
6
5
4
3
2
1
0
Function
0
0
0
0
0
0
BANK_NR
BANK_NR:
(OperatingMode.BufferedReadMode.DataSource.BankNo)
(OperatingMode.NotificationMode.DataSource.BankNo)
(OperatingMode.ScanMode.DataSource.BankNo)
In case of Class 1 Gen 2 Transponder BANK_NR is defined as follows:
b00
reserved
b01
EPC memory bank
b10
TID memory bank
b11
User memory bank
NOTE:
EPC Gen 2 memory banks can only be read in open state.