![background image](http://html1.mh-extra.com/html/feig-electronic/id-isc-lru3000/id-isc-lru3000_manual_3881201118.webp)
OBID
i-scan
®
UHF
Manual
ID ISC.LRU3000/3500
FEIG ELECTRONIC GmbH
Page 118 of 193
H90202-7e-ID-B.docx
8.5. [0x8C] Reset Configuration
The Reset Configuration Protocol is defined to set the complete or parts of reader configuration to
factory default values.
This protocol is an extension of [0x84] Reset Configuration and realizes many improvements:
1. several destinations are addressable
2. one, or all configuration blocks can be reset
3. the address range is up to 65535 configuration blocks for each destination
4. different configuration locations for each destination are addressable
5. protocol ignores write protected configuration blocks and resets only writable configuration
blocks
Host
→
Reader:
Byte
1
2 + 3
4
5
6
7
Contents
0x02
LENGTH
COM-ADR
[0x8C]
DEVICE
BANK
8
9 + 10
11
12 + 13
MODE
CFG-ADR
CFG-N
CRC16
Host
←
Reader
Byte
1
2+3
4
5
6
7 + 8
Contents
0x02
LENGTH
COM-ADR
[0x8C]
STATUS
CRC16
DEVICE:
The DEVICE identifies the target controller inside the reader. The following devices are
acceptable:
DEVICE
Value
RF-Controller
0x02
14