![background image](http://html1.mh-extra.com/html/feig-electronic/id-isc-lru3000/id-isc-lru3000_manual_3881201094.webp)
OBID
i-scan
®
UHF
Manual
ID ISC.LRU3000/3500
FEIG ELECTRONIC GmbH
Page 94 of 193
H90202-7e-ID-B.docx
SSID (Security Set Identifier): (HostInter-
face.WLAN.Security.ServiceSetIdentifier.Enable)
b0:
SSID disabled
b1:
SSID enabled
Authentication Type: (HostInterface.WLAN.Security.AuthenticationType)
b0:
open (accept non-encrypted packets)
b1:
restricted (discard non-encrypted packets)
SSID-LEN: (HostInterface.WLAN.Security.ServiceSetIdentifier.Length)
Number of byte of the SSID (1..28)
SSID (Security Set Identifier): (HostInterface.WLAN.Security.ServiceSetIdentifier.SSID)
Security Set Identifier (max. 28 byte). The SSID must contain only visible ASCII chars.
NOTE:
The impact of the WEP Encryption depends on settings in CFG75. Thus, both configuration
blocks should be modified in succession.
The impact of the WPA Encryption depends on settings in CFG76, CFG77 and CFG 78.
Thus, all configuration blocks should be modified in succession.
The impact of the WPA2 Encryption depends on settings in CFG79, CFG80 and CFG 81.
Thus, all configuration blocks should be modified in succession.
The command