![background image](http://html1.mh-extra.com/html/feig-electronic/id-isc-lru3000/id-isc-lru3000_manual_3881201190.webp)
OBID
i-scan
®
UHF
Manual
ID ISC.LRU3000/3500
FEIG ELECTRONIC GmbH
Page 190 of 193
H90202-7e-ID-B.docx
Hex-value
Interface Status
0x83
RF communication error:
This error indicates that there is an error in communication between the Transponder and the Reader.
Reason for this can be:
Timeout for Transponder communication. “Transponder-Response-Time” in
The collision handling algorithm was not continued until no collision is detected, reasons for the break:
0x84
RF-Warning:
Detailed status information can be read with the command
The antenna configuration isn’t correct. Check the antenna cables and the antenna matching.
The environment is too noisy.
The RF power doesn’t have the configured value.
All RF channel are occupied (EU Reader only).
Hex-value
Buffer Status
0x92
No valid Data:
There is no valid data in the Buffered Read Mode.
There is no Transponder in the antenna field.
The
VALID-TIME
hasn’t elapsed for Transponders in the antenna field.
0x93
Data Buffer Overflow:
A data buffer overflow occurred.
0x94
More Data:
There are more Transponder data sets requested than the response protocol can transfer at once.
0x95
Tag Error
•
A Tag error code was sent from the transponder. The Tag error code is shown in the following byte.
43