OBID
i-scan
®
UHF
Manual
ID ISC.LRU3000/3500
FEIG ELECTRONIC GmbH
Page 181 of 193
H90202-7e-ID-B.docx
NOTE:
This command reads the same data sets until they are cleared with the
This command is only available in the Buffered Read Mode.
Data are only transferred if STATUS = 0x00, 0x83, 0x84, 0x93, 0x94.
If STATUS = 0x83, 0x84, 0x85 the TR-DATA and DATA SETS will be always transferred.
Every time if the trigger starts and stops a data set will be stored. All data will be set to
0x00, only the Input values “IN” and “STATUS” and “Date” and “Time” will be set.