![background image](http://html1.mh-extra.com/html/feig-electronic/id-isc-lru3000/id-isc-lru3000_manual_3881201010.webp)
OBID
i-scan
®
UHF
Manual
ID ISC.LRU3000/3500
FEIG ELECTRONIC GmbH
Page 10 of 193
H90202-7e-ID-B.docx
2. Revision History of Document
Revision
Date
Page
Description
1e
06.09.10
Initial revision
2e
28.07.11
Data Clock Interface as Scan Mode Interface
CFG3: RF-Interface, New Parameter “DC-Power”
CFG4: Transponder Parameter, New Parameter “TID-Length”
CFG85: Linux System Tools
[0x8A] Read Configuration
[0x8B] Write Configuration
[0x8C] Reset Configuration
Annex D: Discontinued Protocols for Reader Configuration
3e
26.08.11
CFG11 Read Mode – Read Data, New Parameter, “Read_Complete_Bank”
[0xB0][0x23] Read Multiple Blocks, New Mode, “Read_Complete_Bank”, More-Data
4e
28.10.11
CFG1 Interface & Mode – Corrections to Data Clock Interface
CFG3 RF-Interface – Definition of new Regions for automatic frequency setup
CFG5 Anticollision – Elimination of Q - Value
CFG15 Antenna Multiplexing – Elimination of Mux Valid Time
6e
11.06.12
[0x25] Block Permalock
[0x26] Read Permalock Status
7e
02.11.12
CFG2: Namespaces added
CFG3: FCC Frequencies corrected
CFG4: New Parameter “Write-Option”
CFG11: Read Complete Bank in dependency of DB-ADR
[0x6E] Reader Diagnostic, new Mode 0x21
[0x23] Read Multiple Blocks, Read Complete Bank in dependency of DB-ADR
[0x24] Write Multiple Blocks, Bytes added in case of error code
[0x18] Kill, Recommissioning Bits added