![background image](http://html1.mh-extra.com/html/feig-electronic/id-isc-lru3000/id-isc-lru3000_manual_3881201161.webp)
OBID
i-scan
®
UHF
Manual
ID ISC.LRU3000/3500
FEIG ELECTRONIC GmbH
Page 161 of 193
H90202-7e-ID-B.docx
A_PW:
Access password which is used to access to the secured state of the Tag.
DB-ADR:
First block number to be read. Depending on EXT_ADR First block can be any value be-
tween 0 and 255 or 0 and 65535.
DB-N:
Number of data blocks to be written to the Transponder, starting at DB-ADR.
The maximum number of DB-N, depends on DB-Size and the interface receiver buffer
size RX-BUF. The number of DB-N is also depending on the length of the UID.
DB-N
max
= 200
DB-SIZE:
Number of bytes of one data block.
DB:
Data of the data block to be written to the Transponder. The required block size is defined
by DB-SIZE. The number of the expected bytes are DB-N * DB-SIZE.
DB-ADR-E:
Block number were the error occurred.
NOTE:
If an error occurred during a write command, the number of the block were the error oc-
curred will be send to host.
DB-ADR-E will be 1 Byte if Extended Addressed Mode is disabled.
DB-ADR-E will be 2 Bytes if Extended Addressed Mode is enabled.