FEC AFC3000, Руководство по эксплуатации оборудования

Страница: 21 / 294

Chapter 1 Outline
PAGE 1-4
☆ ☆ ☆ ☆
High speed communication with connected spindles and host computer
The MFC Unit comes standard with a dedicated ethernet port to connect to a computer running the
AFC3000 User Console Software package. Additionally, a dedicated high speed communication line
between units is used making communication 250 times faster than previous system (AFC1500).
☆ ☆ ☆ ☆
Separated main and I/O power for diversified safety requirements
In order to satisfy a multitude of safety requirements, the servo power and control (circuit board)
power have been separated into two separate connection points. Three phase AC motor power has
its own connector which can be controlled independently by safety circuits as required. A 24VDC
connector is available for the units internal control power. (This allows the controller status can be
monitored by a PLC system even if the motor power is shut off for an emergency stop)
Additionally, a hardwired auxiliary STOP input connector has been added to provide a hardwired
STOP signal when Fieldbus interfaces are used. The independent emergency stop signal can be
used to cease a fastening operation via a hardwired method allowing the system to meet safety
requirements of a hardwired STOP.
☆ ☆ ☆ ☆
Reduced space requirements
The installation space has been reduced by integrating the current spindle control unit with the multi
unit function. One unit meets the requirements of the sequence control and fieldbus specifications in
the same unit.
☆ ☆ ☆ ☆
Display Unit
More data is now available on the display unit by the increased number of display digits from 4 digits
- 2 rows to 6 digits - 2 rows. The operation switch design has improved the function and ease of use
by adopting the use of directional keys.
☆
☆ ☆
☆
Tool Speed/Size
A new tool lineup was developed using high speed motor technology enabling a reduced tool
footprint (size) while increasing output speed (RPM). A single cable to the controller allows for easy
connection and less requirement for spare parts.