Fayat Bomag CR 820 T Tier 4, Инструкция по эксплуатации, Инструкция по техническому обслуживанию

Страница: 57 / 130

4 Operator Controls
Date May 2020
Page 4-17
Operations Manual
CR 820 T
Left Gauge Cluster
• DEF Tank Fluid Level (2A, Figure 4.8) is
displayed digitally.
• DEF Quality percentage (2, Figure 4.8) is
displayed digitally. The quality of the DEF
is displayed as a number between 0 and
60.
• DEF Tank Fluid Temperature (31, Figure
4.8) is displayed in gauge format.
• Propel Mode (H, Figure 4.9) is displayed:
L - Low, M - Medium and H - High.
• Screed Assist icon (C, Figure 4.9) will show
when ON.
• Screed Vibe icon (D, Figure 4.9) will have
animated motion when ON.
Right of Center Gauge Cluster
• Engine Oil Pressure (32, Figure 4.8) is dis-
played digitally.
• Engine Coolant Temperature (33, Figure
4.8) is displayed digitally.
• Engine RPM (34, Figure 4.8) is displayed
digitally.
• Hydraulic Oil Temperature (35, Figure 4.8)
is displayed digitally.
• DEF Tank Fluid Temperature (36, Figure
4.8) is displayed digitally.
• Speed Knob percentage (0% to 100%)
(37, Figure 4.8) is displayed digitally.
• Travel Speed ON/OFF (8, Figure 4.8) is
displayed by icon. The icon (green rab-
bit) is illuminated to show when the paver
is switched to Travel Mode utilizing the
switch on the console panel. The paver
is in PAVE/MANUEVER mode when the
RABBIT icon is not displayed.
Center Gauge Cluster
• Ground Speed (9, Figure 4.8) is displayed.
The speed is displayed digitally in feet-
per-minute up to 120 feet-per-minute. The
Ground Speed is also displayed in gauge
format to a maximum of 80 feet-per-min-
ute.
• Propel % (10, Figure 4.8) is displayed digi-
tally below the Ground Speed.
• Engine RPM (38, Figure 4.8) is displayed
in gauge format below the Propel %.
• Auto Throttle ON/OFF (B, Figure 4.9) - The
icon (Green Arrow Box) is illuminated to
show when the paver has the Auto Throttle
function active.
Lower Screen Area
• Turn Indicator (14, Figure 4.6) is displayed
as a bar graph at the center of the bottom
of the screen. The Turn Indicator displays
the percentage of steer to the left and to
the right. The left hand (L/H) turn icon (blue
paver, 15, Figure 4.6) to the left of the Turn
Indicator bar is displayed when the steering
position is left of the center neutral position.
The right hand (R/H) turn icon (blue paver,
15, Figure 4.6) to the right of the Turn In-
dicator bar is displayed when the steering
position is left of the center neutral position.
• Feed System (4, Figure 4.6) - Enabled/
Disabled is displayed by an icon on each
side of the turn indicators.
The icon (green auger) will become animat-
ed when the system is enabled by utilizing
the left-hand and right-hand switches for the
feed system on the console panel.
The icon (green auger) will become un-
animated when the system is disabled.
NOTE: It is NOT required to enable the
LH or RH Feed Systems before using the
Jog-Forward and Jog–Reverse switches.