Fayat Bomag CR 820 T Tier 4, Инструкция по эксплуатации, Инструкция по техническому обслуживанию

Страница: 36 / 130

2 Safety
Operations Manual
CR 820 T
Date May 2020
Page 2-20
Chips or other debris can fly off objects when struck.
Always use proper personal protective equipment
and make sure that no one can be injured by flying
debris before striking any object.
Safe Paver Operation
Assure all guards and covers are installed properly
before operating or moving the paver.
Never attempt to install or remove any part of an
assembly when the paver is running.
Do not allow personnel to stand or walk between
the front of the paver and the back of the material
transfer equipment while the paver is operating.
Attach screed safety cables or lower the screed be-
fore performing any inspections, repairs, or adjust-
ments to the screed.
Keep all personnel clear of the material feed sys-
tem when the paver is operating.
Do not refuel the paver with the engines or screed
heater system running. All sparks and open flames
must be kept a minimum of 50 ft. away from the
paver when refueling.
Do not wash or spray down the screed or tractor
with the screed heater system operating.
Read, understand, and follow all current OSHA,
federal, state, and local regulations that are appli-
cable to your job and equipment.
When changing the paver configuration or adding
equipment to the paver, all additional guards asso-
ciated with the added equipment must be installed
before operating or moving the paver.
Any changes made to the original design of the
paver must be approved by qualified personnel to
ensure that the changes include appropriate guard-
ing and provide a safe working environment for all
personnel.
Allow only the operator on the operator’s platform
when the paver is in operation.
Before starting the paver, make sure all personnel
are clear.
Before leaving the operator’s seat, stop the paver
by putting the FNR in the STOP position and set-
ting the parking brake.
Reduce travel speed when going down steep
grades to prevent over-speeding.
Do not allow personnel near the hopper area when
the paver is running.
Wear a protective mask when harmful air pollution
exists.
Wear safety goggles, gloves, and long-sleeved
shirts when working near hot asphalt materials.
Wear ear plugs while the paver is running.
Keep the operator’s platform, steps, and screed
walkways clear of all obstructions, tools, and other
items to prevent tripping or falling.
To prevent fire hazards, keep the screed and en -
gine basket free of oil, asphalt, and trash buildup.
Equipment and Tools
Keep tools clean, properly labeled, and in good or-
der.
Keep drive belts and sheaves in good condition.
Frayed belts or cracked sheaves can be danger-
ous and cause downtime.
Keep the equipment clean, free of dirt and grease,
so that loose, cracked, or broken parts are more
easily spotted. Replace defective parts as soon as
they are discovered.
Fire or Explosion Prevention
All fuels and most lubricants are flammable.
Do not smoke while refueling or in a refueling area.
Do not smoke in areas where flammable materials
are stored.
Have all loose or frayed electrical connections and
wires tightened, repaired or replaced before oper-
ating the machine.
Keep all fuels and lubricants stored in properly-