Famco MONT72 Series, Руководство пользователя

Страница: 102 / 113

Shenzhen Hpmont Technology Co., Ltd. Appendix A Parameters
MONT72 Series User Manual V1.0 - 93 -
Ref. Code Function Setting Range Default Unit Attribute Setting
D04: Encoder Status Parameters (see page 48 - 49)
D04.00
C phase value of SINCOS
encoder
0 - 4095 Actual value *
D04.01
D phase value of SINCOS
encoder
0 - 4095 Actual value *
D04.02
A phase value of SINCOS
encoder
0 - 4095 Actual value *
D04.03
B phase value of SINCOS
encoder
0 - 4095 Actual value *
D04.04 UVW status of UVW encoder 0 - 7 Actual value *
D04.05 Electrical angle 0 - 65535 Actual value *
D04.06 Pulses of PG 0 - 65535 Actual value *
D04.07 Pulse monitoring of start slip 0 - 65535 Actual value *
F00: Basic Parameters (see page 49 - 50)
F00.00 Motor type
0: Asyn. Motor
1: syn. motor
0 1 ×
F00.01 Control mode
0: V/f control
1: SVC control
2: Closed-loop vector control
2 1 ×
F00.02 Rated speed of elevator 0.100 - 4.000m/s 1.500m/s 0.001m/s ×
F00.03 Max output freqency 5.00 - 100.00Hz 50.00Hz 0.01Hz
×
F00.04
Mechanical parameters of
motor
10.0 - 6000.0 60.0 0.1
×
F00.05 Operating mode
0: Keypad control
1: Terminal analogue control
2: Terminal MS control
0 1
×
F00.07 Keypad speed digital setting 0.000m/s - F00.02 1.500m/s 0.001m/s ○
F00.08 Running direction selection
0: Same direction
1: Reversed direction
0 1 ×
F01: Protection of Parameters (see page 50 - 51)
F01.00 User’s password 00000 - 65535 0 1
○
F01.01 Menu mode
0: Full menu mode
1: Checking menu mode.
0 1 ○
F01.02
Function code parameter
initialization
0: No operation
1: Restore to factory settings
2: Parameter download
3: Clear fault information
0 1
×
F01.03
Keypad EEPROM parameter
initialization
0: No operation
1: Parameters upload
0 1
○
F02: Start & Stop Parameters (see page 51 - 52)
F02.00 Start delay time 0.000 - 4.999s 0.000s 0.001s
×
F02.01 Brake open delay time 0.000 - 4.999s 0.000s 0.001s ×
A