Famco MONT72 Series, Руководство пользователя

Страница: 72 / 113

Shenzhen Hpmont Technology Co., Ltd. Chapter 6 Function Introduction
MONT72 Series User Manual V1.0 - 63 -
Ref. Code Function Description Setting Range [Default]
F12.13 Filter time of multi-speed terminal 0.000 - 2.000 [0.000s]
Defines the MS filter time to make up for the time error of MS input terminals.
• Change F12.13 according to the change asynchronous level of numbers of MS input terminals.
F12.15 DO1 terminal function 0 - 16 [0]
F12.16 DO2 terminal function 0 - 16 [0]
F12.17 Y1 relay function 0 - 16 [2]
F12.18 Y2 relay function 0 - 16 [3]
F12.19 Y3 relay function 0 - 16 [14]
F12.20 Y4 relay function 0 - 16 [6]
0: Reserved.
• Disable functions of output terminals and make them no any actions.
1: Controller is ready.
• Signal ON will output if MONT72 has no fault.
2: Controller is running.
•
MONT72 is in running status and outputs indicating signal.
3: Zero-speed running.
• ON signal will output if output speed of MONT72 is zero but MONT72 is in run status.
4: Zero-speed.
• ON signal will output if output speed of MONT72 is zero.
5: Contactor output control.
•
To open / close the output contactor.
6: Brake output control.
• To open / close the brake.
7, 8: FDT1, FDT2.
• Refer to F05.12 - F05.13.
9: Speed within FAR signal.
•
The indication signal will output when output speed of MONT72 is within the FAR range. The detect
range is set by F05.16 (Speed within FAR range).
•
The indication signal will also output at stop.
10,11: Up / Down signal output.
• ON signal will output when the elevator is at up / down running.
12: Under-voltage.
•
ON signal will output when MONT72 is in under-voltage status.
14: Controller fault.
•
ON signal will output when MONT72 has fault.
15: Elevator stop signal.
• When the elevator stops, MONT72 will stop and outputs 2s pulse signal, according to which MONT72
revokes run command.
16: Speed outputs.
6