Famco MONT72 Series, Руководство пользователя

Страница: 78 / 113

Shenzhen Hpmont Technology Co., Ltd. Chapter 6 Function Introduction
MONT72 Series User Manual V1.0 - 69 -
Fault history (F17.11 - F17.27)
Ref. Code Function Description Setting Range [Default]
F17.11 The 5th fault type (the latest one) [Actual value]
F17.12 Setting freqency at the lastest fault
F17.13 Running freqency at the lastest fault
F17.14 DC bus vlotage at the lastest fault
F17.15 Output voltage at the lastest fault
F17.16 Output current at the lastest fault
F17.17 Input terminal status at the lastest fault
F17.18 Output terminal status at the lastest fault
F17.19 The lastest fault fault interval
F17.20 NO.4 fault type
F17.21 NO.4 fault interval
F17.22 NO.3 fault type
F17.23 NO.3 fault interval
F17.24 NO.2 fault type
F17.25 NO.2 fault interval
F17.26 NO.1 fault type
F17.27 NO.1 fault interval
F17.12 - F17.19 record status parameters of MONT72 at the last fault.
F17.20 - F27 record the type and interval per time of four faults before the latest. The unit of interval is
0.1 hour.
6.2.18 F18: PWM Parameters
Ref. Code Function Description Setting Range [Default]
F18.00 Carrier frequency 1 - 16kHz [Depend on MT72]
Defines the carrier frequency of PWM output wave.
Controller power Setting range Factory setting
0.2 - 22kW 1 - 16kHz 8kHz
30 - 45kW 1 - 12kHz 6kHz
1234
•
The carrier frequency will affect the operating noise of the motor. The higher the carrier frequency, the
lower the noise made by the motor. Please properly set the carrier frequency.
• When the value is higher than the factory setting, MONT72 should be derated by 5% when per 1kHz is
increased compared to the factory setting.
F18.01 Carrier freqency auto adjust selection 0,1 [0]
0: Prohibited.
1: Allowed.
F18.02 PWM overmodulation enable 0,1 [1]
0: Disable.
1: Enable.
F18.03 PWM overmodulation mode 0,1 [0]
0: Two phase / Three phase switch.
1: Three phase.
6