F5 BIG-IP 11050, Руководство пользователя

Страница: 41 / 72

Important: F5 Networks strongly recommends that you use only one power supply type (AC or DC) in a
platform.
Note: Depending on the model and revision of the power supply, you might need either a Phillips or a
slotted screwdriver to replace the power supply.
Installing an AC power supply
In the event of a power supply failure, you can replace an AC power supply without powering down the
system, provided that there is at least one power supply operating during the replacement process.
1. Disconnect the AC power cord from the power supply.
2. Loosen the power supply screw by turning it counterclockwise with an appropriate screwdriver, if
necessary.
Note: The screw that holds the ejector handle in place is captive and cannot be removed from the
assembly.
3. Grasp the ejector handle and rotate it downward to eject the power supply from the system.
4. Remove the power supply from the system by pulling straight toward you.
41
Platform Guide: 11050