F5 BIG-IP 11050, Руководство пользователя

Страница: 31 / 72

Installing using a four-point rack mounting kit
Before you install this platform, review the environmental guidelines to make sure that you are installing
and using the platform in the appropriate environment.
Caution: Due to the weight of this platform, two people are required to unpack and install it. Failing to
use two people can result in severe personal injury or equipment damage and might violate safety regulations.
This platform includes front- and rear-mounting brackets and a rear-mount support bracket, which you can
use to attach the unit directly to the rack.
1. Align the holes on the front-mounting bracket with the holes on the side of the unit.
2. Secure the front bracket to the unit using two of the SEMS screws and three of the flat head screws
provided with the kit.
Use 18 to 20 inch-pounds (2.0 to 2.3 Newton-meters) of torque on these screws.
3. Adjust the rear brackets so that the distance between the back of the front bracket and the back of the
rear bracket matches the distance between the faces of the front and rear rack rails.
The distance between the front and rear brackets is limited to 22-25 inches (55.88-63.5cm).
31
Platform Guide: 11050