F5 BIG-IP 11050, Руководство пользователя

Страница: 34 / 72

If you are installing the 11050 NEBS platform into a 23-inch telco-style rack, you use the larger set of
center-mounting brackets.
Figure 5: Center-mounting brackets for 23-inch rack
Center-mounting kit hardware
The center-mounting kit includes these parts.
Hardware Quantity
center-mounting brackets for 19-inch rack 2
center-mounting brackets for 23-inch rack 2
M4 x 8mm SEMS screws 12
Installing to a 19-inch rack using a center-mounting kit
Before you install this platform, review the environmental guidelines to make sure that you are installing
and using the platform in the appropriate environment.
Caution: Due to the weight of this platform, two people are required to unpack and install it. Failing to
use two people can result in severe personal injury or equipment damage and might violate safety regulations.
Caution: The center-mounting kits are only intended for installing the 11050 NEBS platform into a 19-inch
or 23-inch telco-style (two-post rack). For installing the NEBS platform into all other types of racks or
cabinets, you should use the four-point rack mounting kit.
This platform includes center-mounting brackets that you can use to attach the unit directly to a 19-inch
telco-style rack.
1. Align the holes on the center-mounting bracket with the holes on the side of the unit.
2. Secure the bracket to the unit using six of the SEMS screws provided with the kit.
Use 18 to 20 inch-pounds (2.0 to 2.3 Newton-meters) of torque on these screws.
34
Platform Installation