F5 BIG-IP 11050, Руководство пользователя

Страница: 16 / 72

Viewing the status of a specific interface using tmsh
You can use
tmsh
to view the status of a specific interface on a platform.
1. Open the Traffic Management Shell (tmsh).
tmsh
2. Change to the network module.
net
The system prompt updates with the module name:
user@bigip01(Active)(/Common)(tmos.net)#
.
3. Display the current status of a specific interface.
show interface <interface_key>
The following is an example of the output you might see when you issue this command on interface
1.2:
---------------------------------------------------------
Net::Interface
Name
Status Bits Bits Errs Errs Drops Drops Colli
In Out In Out In Out sions
---------------------------------------------------------
1.2
up 191.4K 0 0 0 374 0 0
Viewing the status of all interfaces using tmsh
You can use
tmsh
to view the status of all interfaces on the platform.
1. Open the Traffic Management Shell (tmsh).
tmsh
2.
Change to the network module.
net
The system prompt updates with the module name:
user@bigip01(Active)(/Common)(tmos.net)#
.
3. Display the current status of all interfaces.
show interface
The following is an example of the output you might see when you issue this command:
------------------------------------------------------------
Net::Interface
Name
Status Bits Bits Errs Errs Drops Drops Colli
In Out In Out In Out sions
------------------------------------------------------------
1.1
down 0 0 0 0 0 0 0
1.2 up 191.4K 0 0 0 374 0 0
1.3 down 0 0 0 0 0 0 0
1.4 up 22.5K 0 0 0 44 0 0
2.1 miss 0 0 0 0 0 0 0
2.2 miss 0 0 0 0 0 0 0
mgmt up 43.2G 160.0G 0 0 0 0 0
16
The 11050 Platform