F5 BIG-IP 11050, Руководство пользователя

Страница: 12 / 72

Using LCD menus
Press the X button to put the LCD in Menu mode.
The Left Arrow, Right Arrow, Up Arrow, and Down Arrow buttons are functional only when the LCD
is in Menu mode.
Pausing on a screen
Normally, the screens cycle on the LCD panel at a constant rate, but you can pause on a specific screen.
Push the Check button to toggle the LCD screen between Hold and Rotate modes.
In Hold mode, a single screen is displayed. The Rotate mode changes the screen displayed on the LCD
every four seconds.
Powering on the unit
Press the Check button to power on a unit that is shut down.
Halting the unit
We recommend that you halt the unit before you power it down or reboot it using the LCD menu options.
1. Press the X button, then use the arrow keys to navigate to the System menu.
2. Press the Check button.
3. Navigate to the Halt menu.
4. Press the Check button.
5. Press the Check button again at the confirmation screen.
Wait 30 seconds before powering the machine off or rebooting it.
Putting the unit into standby mode
Hold the X button for four seconds to put the unit in standby mode and power off the host subsystem.
F5 Networks recommends that you halt the system before you power off the system in this manner.
Rebooting the unit
Hold the Check button for four seconds to reset the unit.
You should only use this option after you halt the unit.
12
The 11050 Platform