background image

Installation and Operation, cont’d

TLP 350CV • Installation and Operation

2-10

 

Installing the Shelf Assembly

From the underside of the Cable Cubby:

1. 

From the underside of the Cable Cubby, push the AAP shelf assembly 

into position at the desired elevation.  Choose the adjustment height that 

provides enough clearance to allow the lid to be closed without contacting the 

connectors.   

N

  If the AAP shelf assembly does not slide easily into the cubby, loosen the 

AAP mounting nuts.  Retighten the AAP mounting nuts once the AAP shelf 
assembly is installed in position.

COMPUTER

AUDIO

Philips Head Screws
(secures AAP Shelf
Assembly)

Tighten down
AAP Nuts.

Push assembly through 
bottom of enclosure.

Large holes 
provide tool 
access to fasten
rear brackets.

2

1

3

Figure 2-8 — AAP shelf assembly installation

2. 

With the AAP assembly at the desired location install two Phillips head 

screws on each end of the shelf brackets in the front and two in the rear of the 

enclosure as shown in figure 2-8.  The larger holes in the enclosure provide 

tool access for the rear bracket screws.

3. 

Tighten the nuts that secure the AAP plates to the shelf brackets.

Содержание 60-1017-0200





























































Отзывы: