Extron electronics 60-1017-0200 Скачать руководство пользователя

Страница: 29 / 60

3-3

TLP 350CV • Initial Configuration

Backlight

If ambient lighting is bright, the screen may need a high level of backlighting to

read the screen. With low ambient lighting, the backlighting should be low. Adjust

backlighting from 0 to 100% by pressing the

Down

buttons. The current

setting is shown just above the buttons.

Auto Backlight

Auto backlight provides a suitable amount of backlighting calculated from the

amount of ambient light detected by the light detector on the front panel. Use the

Auto Backlight

button to toggle Auto Backlight Off and On.

LED Backlight

An LED Backlight illuminates the ten buttons next to the screen. Use the on-screen

button to toggle the option

Off

and

Volume Control

The Volume Control menu allows the user to adjust the maximum volume of the

sound, individual volume of button click feedback, and audio playback.

Main

Down

Master: 255

Click: 255

Sounds: 255

Figure 3-3 — Volume control menu

Master Volume

The Master Volume defines the maximum volume for all playback. All other

volume settings will be scaled in proportion. If the master volume is set at 50% of

full volume and the Click Volume is also set at 50% of its full volume, the maximum

volume for the Click playback will be 50% of 50%, or 25%. Adjust the master

volume from 0 to 255 by pressing the

Down

buttons.

Click Volume

Click Volume provides audio feedback of button presses including the side buttons

and the touch panel buttons. Adjust click volume from 0 (min) to 255 (max) by

pressing the

Down

buttons.

Sounds Volume

Sounds Volume provides audio monitoring of a playback device, if connected.

Adjust sound volume from 0 (min) to 255 (max) by pressing

Down

Содержание 60-1017-0200





























































Результаты поиска

Содержание 60-1017-0200

Отзывы:

Похожие инструкции для 60-1017-0200

Бренды по названию

Популярные бренды

Extron electronics 60-1017-0200, Руководство пользователя

Результаты поиска

Содержание 60-1017-0200

Отзывы:

Похожие инструкции для 60-1017-0200

Бренды по названию

Популярные бренды