Extron electronics 60-1017-0200 Скачать руководство пользователя

Страница: 55 / 60

B-3

TLP 350CV • Reset Modes and Button Replacement

TLP 350CV and TLP 350CV Reset Mode Summary

Mode Mode Activation

Result

Purpose/Notes

Use Factory Firmwar

Hold the reset button while applying

power.

After a mode 1 reset, update the
TLP 350CV firmware to the latest
version. DO NOT operate the
firmware version that results from
this mode reset

The TLP 350CV reverts to the factory

default firmware.
Event scripting does not start if the

TLP 350CV is powered on in this mode. All

user files and settings (drivers, adjustments,

IP settings, etc.) are maintained.

If you do not want to update the
firmware, or performed a mode 1
reset by mistake, cycle power to
the TLP 350CV to return to the
firmware version running prior to
the reset.

This mode reverts to the factory

default firmware version if

incompatibility issues arise with

user-loaded firmware.

User-defined Web
pages may not work
correctly if using
an earlier firmware
version

Run/Stop

Events

Press and hold the Reset button until

the Power LED blinks once (3 sec.), then

release and within 1 second press Reset

momentarily (<1 sec).

Nothings happens if the
momentary press does not occur
within 1 second.

Mode 3 toggles events on or off.

Useful for troubleshooting

Reset all

IP Settings

Press and hold the Reset button for

about 6 sec. until the Power LED blinks

twice (once at 3 sec., again at 6 sec.), then

release and within 1 second press Reset

momentarily (< 1 sec.).

Nothing happens if the
momentary press does not occur
within 1 second.

Mode 4:

•

Enables ARP capability.

•

Set the IP address to default.

•

Sets the subnet to default.

•

Sets the gateway address to default.

•

Sets port mapping back to default.

•

Turns DHCP off.

•

Turns events off.

Enables setting IP address

information using ARP and

MAC address.

Reset to

Factory Defaults

Press and hold the Reset button for about 9

sec. until the Power LED blinks three times

(once at 3 sec., again at 6 sec., again at 9

sec.), then release and within 1 second press

Reset momentarily (< 1 sec.).

Nothing happens if the
momentary press does not occur
within 1 second.

Mode 5 performs a complete reset to
factory defaults, except for firmware:

•

Does everything mode 4 reset does.

•

Removes button/touch panel

configurations.

•

Resets all IP options.

•

Removes scheduling settings.

•

Removes/clears all files from the

TLP 350CV.

Useful to start over with

configuration and/or

uploading, and to replace

events.

Factory Default Settings

IP Address: 192.168.254.254

DHCP: Off

Subnet Mask: 0.0.255.255

Events: off

Default Gateway: 0.0.0.0

ARP: enabled

Port Mapping: xxxx

Содержание 60-1017-0200





























































Результаты поиска

Содержание 60-1017-0200

Отзывы:

Похожие инструкции для 60-1017-0200

Бренды по названию

Популярные бренды

Extron electronics 60-1017-0200, Руководство пользователя

Результаты поиска

Содержание 60-1017-0200

Отзывы:

Похожие инструкции для 60-1017-0200

Бренды по названию

Популярные бренды