Extron electronics 60-1017-0200, Руководство пользователя

Страница: 16 / 60

Installation and Operation, cont’d
TLP 350CV • Installation and Operation
2-6
Installing the Cables and AAPs
Each TLP 350CV includes pass-through AAPs and a power module. A wide range
of passive AAPs are also available allowing direct connection of cables from the top
and underneath the AAPs. Depending upon the configuration, the enclosure can
support up to nine (9) AAPs. The power module, if used, must be installed first
and takes two or three AAP spaces depending upon the module.
Install the Included Power Module
From the underside of the Cable Cubby, gently push the power module into
position at the desired location and elevation. Secure the power module into
position with two #4-40 Phillips head screws.
N The included power module takes up two or three AAP spaces and will be
installed on the left side of the TLP 350CV.
Install the power
module on the
left side.
Push module through
bottom of enclosure.
Secure in place with screws.
Figure 2-3 — Power Module installation