Extreme Networks EPICenter 4.1, Руководство по установке программного обеспечения

Страница: 192 / 546

192 EPICenter Software Installation and User Guide
Using the Interactive Telnet Application
Figure 84: The Telnet applet, macro interface
The Telnet Connections list displays the switches in all of the device groups, and shows the status of
any macros that have run or are being run on the switch. If macros are not supported on an individual
switch (true of third party switches and a few Extreme switches) the Macro Status will be “Macros not
supported.”
NOTE
If a switch is not supported by the EPICenter interactive Telnet feature, it will not appear in the Telnet
Connections list, or in the Component Tree in this applet.
When a Telnet session is currently open on a switch, the switch name is highlighted in bold in the list of
switches in the Component Tree.
NOTE
If a switch displayed in the Component Tree has an “S” in a red circle along with the name, that means
that the switch is not responding to SNMP requests. However, the switch may still respond to HTTP or
Telnet requests.
Running ExtremeWare Command Macros
The lower half of the Macro view page contains the macro command buffer. You can enter a series of
ExtremeWare commands into this buffer, which will form a script that can be played to the set of
switches you select in the Telnet Connections list.