Extreme Networks EPICenter 4.1, Руководство по установке программного обеспечения

Страница: 97 / 546

Discovering Network Devices
EPICenter Software Installation and User Guide 97
status messages for each device it finds as it works through the set of IP addresses you have
specified.
Figure 24: Results of a discovery, with details visible
— Click the Hide Details button at the bottom of this window to hide the detail display.
— Click View Details to re-display the discovery details.
When the discovery has completed, the set of discovered devices is listed in the top panel of the
Discovery Results window.
NOTE
These devices are NOT automatically entered into the EPICenter database. You must explicitly
select and add devices to the database.
11 To add devices to the EPICenter database, select individual devices or a range of devices in the
Results list, and click the Add button at the bottom of the window.
NOTE
If you select multiple devices, make sure the devices you select have identical contact information.
As part of the Add process, you will be asked for a single password that will apply to all the selected
devices. If the password is specified incorrectly for any of these devices, the add will fail for those
devices.
12 A window appears where you must set additional device options such as a write community string,
the device group to which the devices should be added, a default device login, password, and if SSH
is used (see Figure 25). If there are Cisco devices among the set being added, you must also enter a
Cisco enable password.
Enter or make changes to any of these fields. These options will apply to the entire set of devices
you are adding.