Extreme Networks EPICenter 4.1 Скачать руководство пользователя страница 262

Страница: 262 / 546

262

EPICenter Software Installation and User Guide

Using ExtremeView

• Description

—A description of the module that is inserted into the slot

• Primary Version

—The primary ExtremeWare software image running on the module

• Secondary Version

—The secondary ExtremeWare software image running on the module

• Current Version

—The current ExtremeWare software image running on the module

• BootROM Version

—The current BootROM image running on the module

• Module Processor State

—The operational state of the General Processor and the Network

Processor(s) in the module.

NOTE

The Component Tree does not display the empty slots in a device.

To view Network Login/802.1x information, click the Network Login/802.1x tab, as shown in
Figure 120.

Figure 120: Network Login/802.1x tab of Device Slot Properties window

The Network Login/802.1x tab lists the following Network Login/802.1x information about each
user connected to the slot:

• Port—

The port on the device on which the user is logged in.

• User Name—

The name of the user.

• IP Address—

The IP address of the user’s host.

• Login Type—

The login type, either network login or 802.1x.

• MAC Address—

The MAC address of the user’s host.

Содержание EPICenter 4.1



































































































































































































































































































































































































































































































































































Результаты поиска

Содержание EPICenter 4.1

Отзывы:

Extreme Networks EPICenter 4.1, Руководство по установке программного обеспечения, Страница: 262 / 546

Результаты поиска

Содержание EPICenter 4.1

Отзывы: