Extreme Networks EPICenter 4.1 Скачать руководство пользователя страница 259 | Manualshive

Страница: 259 / 546

background image

Displaying Properties

EPICenter Software Installation and User Guide

259

Displaying Properties

You can view the properties of a device group, device, slot, or port in the EPICenter database. This
section describes how to view properties through the ExtremeView applet.

Device Group Properties

You can view summary information for all device groups, or view information about individual device
groups.

To view summary information for all device groups, right-click on the Device Groups component and
select Properties from the pop-up menu.

The Device Groups Properties window appears, showing the All Device Groups display. This displays a
list of the current device groups and their descriptions. For more details about this display, see
Chapter 4.

You can also view properties for a specific device group. To view properties for a specific device group,
right-click on a device group and select Properties from the pop-up menu.

The Device Group Properties window appears, showing information about the selected group. This
includes the group description, the number of devices in the group, and a list of the devices. For more
details about this display, see Chapter 4.

Device Properties

To view properties for a device, right-click on a device in the Component Tree and select Properties
from the pop-up menu that appears.

The Device Properties window has five tabs at the top of the window:

•

Device

•

VLAN

•

STP

•

Network Login/802.1x

•

Syslog Messages

Each tab displays the name of the device and a status “light” which shows the status of the device as
detected by EPICenter.

The Device Tab

The Device tab displays information about the device such as its IP address, MAC address, and boot
time. The main section of the window presents the same information you can view in the Inventory
Manager for the device. If the device is an Extreme device, the ExtremeWare software running in the
switch provides comprehensive status information.

The VLAN Tab

The VLAN tab lists the VLANs configured on the device.

«
...
257
258
259
260
261
...
»

Содержание EPICenter 4.1



































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для EPICenter 4.1

COOL 3D-PLUG-IN MADNESS II

Бренд: Ulead Страницы: 10

Бренд: AMD Страницы: 120

Бренд: Waves Страницы: 20

GROUPWISE 7 - WEB ACCESS

Бренд: Novell Страницы: 110

PHOTOSHOP CS 2.0 - SCRIPTING GUIDE

Бренд: Adobe Страницы: 91

NI Spectral Measurements Toolkit

Бренд: National Instruments Страницы: 35

Бренд: Brocade Communications Systems Страницы: 64

Бренд: Brother Страницы: 22

Бренд: Brother Страницы: 115

Bluetooth for Microsoft Windows

Бренд: Broadcom Страницы: 30

Бренд: ADS Technologies Страницы: 2

Бренд: Texas Instruments Страницы: 63

MOBILE SECURITY FOR S60 -

Бренд: F-SECURE Страницы: 33

Бренд: Autodesk Страницы: 4

240B1-05A111-1301 - Revit Architecture 2010

Бренд: Autodesk Страницы: 14

Secure Backup 10.3

Бренд: Oracle Страницы: 174

Бренд: Oregon Scientific Страницы: 8

Бренд: ICP Страницы: 6

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды