Extreme Networks EPICenter 4.1 Скачать руководство пользователя страница 83 | Manualshive

Страница: 83 / 546

Extreme Networks EPICenter 4.1 Скачать руководство пользователя страница 83

Navigating the EPICenter Applications

EPICenter Software Installation and User Guide

83

is a VLAN, then it typically has Extreme switches as subcomponents. A switch may have ports as
subcomponents, or slots which in turn have ports.

•

Click on the plus sign to display the nested subcomponents.

The plus sign changes to a minus sign.

•

Click on the minus sign to hide the subcomponents.

Most objects in the Component Tree are represented both by a text identifier and by a small icon that
represents the type of object. Following are some examples of icons used in the Component Tree:

indicates a device group.

,

,

, and

are examples of device icons.

indicates an untagged VLAN, and

is a tagged VLAN.

,

,

, and

are examples of folder icons.

indicates a general-purpose group in the Grouping module.

indicates a host resource in the Grouping module.

indicates a user resource in the Grouping module.

Devices are identified in the tree by their device name (as defined in the

SysName

MIB variable) and IP

address. A user with administrator access can change this to reverse the order of the IP address and
device name, or to display the device name only. This is done through a server property set in the
Administration module. See “Other Properties” in Chapter 16 for details on how to do this.

The Status/Detail Information Panel

The right side panel displays information about the component selected in the tree on the left. For
example, Figure 17 shows the Inventory Manager applet, with basic information about the devices
known to the EPICenter.

«
...
81
82
83
84
85
...
»

Содержание EPICenter 4.1



































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов