background image

 

366

EPICenter Software Installation and User Guide

Administering EPICenter

— Accept SysLog messages with Min Severity

: The minimum severity level of messages to be 

logged in a switch Syslog file. All messages with Severity equal to or higher than the setting you 
select will be logged. For example, if you select 2:Critical, then messages of severity 2 (Critical), 1 
(Alert), and 0 (Emergency) will be logged. The default is 6: Information

• Save Changed Configurations Only

 (checkbox): A check specifies that device configurations should 

be uploaded by the Configuration Manager Archive feature only when the device configuration has 
changed (the default). Uncheck the checkbox to specify that switch configurations should always be 
uploaded at the scheduled archive time.

• Automatically Save Configuration on Device

 (checkbox): A check indicates that EPICenter 

automatically saves the configuration to a switch whenever configuration changes are made. This is 
the default setting. If this checkbox is not checked, you must use the Save command to save changes 
to a switch configuration.

• Poll Devices Using Telnet

 (checkbox): A check enables regular CLI/Telnet polling of ExtremeWare 

4.1 devices (the default). Uncheck the checkbox to disable CLI/Telnet polling. This disables ESRP 
polling as well as EDP polling. 

• Save Switch Password for Vista Login 

(checkbox): A check specifies that the ExtremeView module 

should save the switch password in the EPICenter database for use when logging into a switch using 
ExtremeWare Vista. If you disable (uncheck) this property, you will be required to login to each 
switch in order to view Configuration and Statistics information in the ExtremeView applet. The 
default is enabled (passwords will be saved). 

• Use EPICenter Login/Password for Telnet/SSH

: A check indicates that the EPICenter login name 

and password should be used for establishing user-initiated Telnet or SSH2 sessions with the switch. 
Background functions, including trap handling, polling, and scheduled operations continue to use 
the Telnet/SSH login and password configured for the switch using the Inventory Manager.

Scalability Properties

Select Scalability from the drop-down menu field at the top of the properties panel to set the EPICenter 
server into Scalable mode (or reset it into regular mode) and to modify the number of concurrent 
operations the EPICenter server can run.

Manipulating the thread pool size, default thread allocation size, number of SNMP sessions, and the 
number of traps and syslog messages EPICenter processes per minute lets you configure the EPICenter 
server to provide better performance based on the amount of server resources (number and speed of 
processors, amount of memory) available. Changing these values should not normally be necessary 
unless you are managing a very large number of devices (more than 1000 devices). 

If you are managing more than 1000 devices, it is recommended that you run the EPICenter server on a 
system with a 1 GHz or faster processor, and at least 1 GB of physical memory. For such a 
configuration, you may also be able to improve the performance of the EPICenter server by changing 
the parameters below. 

NOTE

Changing the scalability properties on a system without suitable hardware could actually decrease the 
performance of the EPICenter server. 

To see the effects of the current scalability settings, run the Server State Summary Report in the 
Reports applet. 

Содержание EPICenter 4.1



































































































































































































































































































































































































































































































































































Отзывы: