manualshive.com logo in svg

Extreme Networks EPICenter 4.1, Руководство по установке программного обеспечения, Страница: 354 / 546

Поделиться
Скачать
Extreme Networks EPICenter 4.1 Скачать руководство пользователя страница 354

 

354

EPICenter Software Installation and User Guide

The ESRP Manager

ESRP trap events will also be recorded in the EPICenter Event Log, which you can view using the 
EPICenter Event Log Report (see Chapter 17). ESRP state change traps will be recorded in the EPICenter 
Alarm Log (see Chapter 5).

NOTE

ESRP Traps are not implemented in ExtremeWare versions 4.x or 5.x. Thus, for switches running those 
versions of ExtremeWare, state changes and other ESRP updates will only be reflected after the next 
device polling interval. 

Note that an ESRP-enabled VLAN can be monitored by EPICenter as long as at least one of its 
ESRP-enabled switches is managed by EPICenter (i.e. is included in EPICenter’s device database). If 
there are other ESRP-enabled switches in that VLAN, their ESRP status will also be displayed in the 
ESRP Manager, even if they are not being managed by EPICenter. 

The Detailed ESRP Information view displays the following information:

• Switch Name

—The name of the switch, if known. (If the switch is not being managed by EPICenter, 

this field will contain “N/A.”)

• MAC

—The MAC address of this switch. 

• State

—The current state of the switch—Master or Slave.

• Priority

—A user-defined value, between 0 and 254, which can be used by the ESRP election 

algorithm in determining which switch is the Master switch. The default is 0.

• To  Master

—The number of times this switch has transitioned to become a Master. 

• To Slave—

The number of times this switch has transitioned to become a Slave.

NOTE

The number of Master and Slave transitions cannot be obtained from versions of ExtremeWare prior 
to version 6.1.6. For switches running earlier versions of ExtremeWare, the display defaults to “N/A.” 

NOTE

If some of the ESRP-enabled switches in an ESRP-enabled VLAN are not managed by EPICenter, 
the ToMaster and ToSlave values for those switches will not be updated until the next device polling 
interval.

• Active  Ports

—The number of active ports in this ESRP-enable VLAN.

• Tracked Ports

—The number of tracked ports that are currently active.

• Tracked Routes

—The number of tracked IP routes that are currently active.

• Tracked Pings

—The number of tracked ping responders that are responding successfully. 

NOTE

The number of Tracked Pings cannot be obtained from versions of ExtremeWare prior to version 
6.1.6. For switches running earlier versions of ExtremeWare, the display defaults to zero. 

Содержание EPICenter 4.1



































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов