Extreme Networks EPICenter 4.1, Руководство по установке программного обеспечения

Страница: 323 / 546

Displaying a VLAN
EPICenter Software Installation and User Guide 323
NOTE
You must add switches to the EPICenter database through Discovery or by using the Add function in
the Inventory Manager. Until you add a switch to the database, you cannot use EPICenter create any
VLANs on that switch.
Information about VLAN configurations is obtained when a switch is added to the database.
The VLAN Manager can display information either by VLAN (showing all the switches with ports that
are members of a specific VLAN) or by switch (showing the VLANs that have members on a specific
switch).
• Select the By VLAN button to display VLANs at the first level of the Component Tree. Listed under
each VLAN is every switch that has the VLAN defined on it (see Figure 158).
When the top level of the tree (the VLANs node) is selected, the right hand panel displays a list of
all VLANs configured on the Extreme Networks switches included to the EPICenter database. The
All VLANs
display includes:
• Name —The VLAN name
• Tag —The VLAN tag value (if any) or “Untagged”
• Protocol —The protocol filter configured for the VLAN
Select an individual VLAN to view a summary of the configuration of the switches and ports that
are members of that VLAN.
• Select the By Switch button to display switches at the first level of the Component Tree. Listed
under each switch is every VLAN that is defined on the switch, as shown in Figure 159.
When the top level of the tree (the Switches node) is selected, the right hand panel displays a list of
the Extreme Networks switches known to the EPICenter database on which VLANs are configured.