NexLog Recorder User Manual v2.2.0
51
IP Address
: Address of the first Ethernet port in the system
MAC Address
: Media Access Control address of the first Ethernet port in the
system
Total memory KB
: Amount of usable RAM in the system
Current Time
: Current local date and time of the recorder
Time zone
: Time zone setting of the recorder
Storage Devices
: List of the available storage devices in the recorder. (Hard
Drives, RAIDs, SAN, etc.) This list does not include archive devices.
In addition to all the information described above, this page contains two
additional important buttons, 'Import Configuration' and 'Export Configuration'.
Export Configuration allows you to export all of the recorder's configuration
settings for back up and safe keeping. 'Import Configuration' allows these
settings be re-loaded into the recorder. This is designed to allow you to back up
and restore your settings, for example, if you want to reinstall your recorder's
firmware. You can also use this option to Import the configuration from a
different recorder with identical hardware. It is not supported to Import
Configurations across different hardware (models, storage devices, Telephony
Boards). After performing a Configuration Import, it is important to immediately
reboot your recorder.
Identification
Recorder Name
: The logger name that will be displayed by in remote clients.
Facility Name
: The facility name (i.e.: location) that will be stored on archive
media.
Interfaces
This page displays a summary of the recording boards installed the system.
History
Recorder Run History
: Displays a history of system startup and shutdown.
Also note that unplanned shutdowns are noted in this list and usually indicate
a power failure to the recorder. Unplanned Shutdowns can cause severe issues
and should be avoided.
Recorder Upgrade History
: Displays a history of the first firmware install on
the recorder and subsequent updates.
4.3.2. Date and Time
This page allows you to configure your date/time and time sync settings. The
top two items are Time and Time zone. To modify these settings and have them
take effect when you click 'Save', you must first click the 'Edit' checkboxes. This